Testing and Isolations
Innovator Offers Superior Testing & Isolation Services
During turnaround and maintenance activities, new tie-ins are installed, valves and tees are cut in, and flanges are replaced.
During many of these welds, dangerous and explosive vapours fill the lines, requiring double-block and bleed isolations for added safety and protection. After the joint has been welded, it then requires hydro testing. Many times to test that one weld, hundreds of feet of pipe would need to be filled and tested, resulting in high material and environmental disposal costs of test mediums.
By using a variety of plugging tools and gas bags, Innovator provides our clients with full double-block and bleed welder isolations and localized weld hydro testing to remove the need of full-system tests.
A Variety of Isolation Bags For Your Project
When a welder is downstream and you want to prevent the gases from escaping and subsequently causing harm, an isolation bag may be your perfect solution.
The isolation bag comprises a canopy enclosing the bag tube, which is then mounted on the universal base, enabling a stopper bag to be inserted through a tapping into the main and inflated to stop the flow of gas.
Sets of interchangeable noses and shoes permit the stopper bag to be correctly positioned relative to the centre of the main and positive support of the inflated stopper bag against the gas.
Contact Innovator Industrial For Your Testing & Isolation Needs
Innovator provides a complete range of testing and isolation services and programs to ensure a leak-free operation at any facility.Contact an Expert