Innovator Industrial Services is currently recruiting On-Line Leak Repair Technicians to repair various process leaks on live operating systems under pressure. Reporting to the Field Service Supervisor, this position directly contributes and supports the Leak Repair service line of Innovator Industrial Services and provides client billable person-hours on work in the field.
Perform all duties as assigned by supervision including, but not limited to, the following as needed:
Possess the skills found in the leak repair skill register located at the end of this posting (the skills possessed will determine skill level and pay grade)
Communicate/Coordinate with plant personnel in a professional and respectful manner
Assess leaking component(s) and provide relevant information to supervisor and engineering
Take field measurements of leaking component (ability to sketch and properly dimension non-standard components is a must)
Competent use of the following measuring devices: Vernier calipers, OD calipers, ID calipers, circumference tape, measuring tape (able to read increments to 1/32), depth gauge, level, square, and angle finder
Ability to adhere to Innovator Job Hazard Analysis (JHA) and Safe Work Procedures (Procedural non-compliance will not be tolerated)
Conduct, and/or take part in, Field Level Risk Assessments and toolbox talks.
Complete daily reports outlining the work activities
Complete daily timesheets (LEMs) detailing the labour, equipment, and materials used during the work activities for each day
Communicate daily activities with office personnel, promptly reporting issues, change in scope or change in field conditions.
Communicate with co-workers in order to facilitate knowledge transfer, including ability to mentor junior technicians
Minimum Academic Credentials: High School Diploma
Valid Driver’s license
Extensive and exceptional customer service practices
Previous work experience in an industrial or plant environment an asset
Computer application knowledge is an asset (MS Word, Excel, Outlook)
Exceptional interpersonal and teamwork skills
Good prioritizing, multi-tasking, and decision making skills
High degree of discretion and confidentiality
Entrepreneurial work ethic
Field duties require outdoor work in a plant atmosphere
Interaction with other crew employees, as well as supervisors and client personnel.
Working in plant and/or shop areas around production machinery with extreme noise levels.
Exposure to live process leaks operating at high pressure/temperature
Extreme working conditions ie/ very hot or frigid temperatures
Work in confined space and IDLH atmospheres (relevant training, safeguards, and PPE to be provided)
Ability to work from heights (including aerial work platforms, ladders, towers, etc)
Must be able to wear safety equipment as required by the safety department for personal protection (ie/ full body harness, SCBA, SABA, respirators, chemical suits, steam suits, bunker gear, etc.)
Camp accommodations will be supplied on a rotation basis, if applicable.
Will be required to travel out of town on a periodic basis.
Must be able to lift and carry 50 pounds.
Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively.
Ability to sit or stand for prolonged periods of time with or without reasonable accommodation.
Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations.
Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties.
Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations.
Leak Repair Technician Skill Register:
Valve Packing Injection
Wire & Peen injection
Segmental Wire & Peen injection
Wire Wrap and/or Cable Tensioning Injection
Work on High Pressure Leaks (>600psi)
Use of High Pressure Packing Gland (HPPG)
Install & Inject Void Fill Enclosure
Install & Inject Flange Clamp
Install & Inject Tongue Clamp
Install (and inject) Perimeter Seal Enclosure
Perform Manual Pipe Crimp
Perform Hydraulic Pipe Crimp
Complete a Threaded Union Injection
Complete a Valve Seat Injection
Complete an Upstream Valve Kill
Perform a Hot Stud Change-out
Ability to create a proper bolt pattern in field
Ability to use torque equipment
Work on Flammable Service
Use of grounding equipment for flammable service
Work on Oxygen Service
Preparation of equipment for work on Oxygen Service
Proper Sealant Selection based on process conditions